Progammer Menu; Configuration Complete - Comelit 6501 Manuel D'utilisation

Setting the language
1. Press USER to access the USER MENU.
USER MENU
Memory
Melodies Settings
Key tone
Set language
2. Press "Set language" to access the CHANGE
LANGUAGE screen.
MODIFY LANGUAGE
Italiano
English
Français
Español
3. Press the selected language.
4. Press CONFIRM to save the language selection or
CANCEL to return to the CHANGE LANGUAGE screen
without saving the changes.
Calibrating the touch-screen
The "calibrate touch-screen" function is used to calibrate
the sensitivity of the display to your "touch".
1. Press USER to access the USER MENU.
USER MENU
Melodies Settings
Key tone
Set language
Calibrate touch-screen
2. Press "Calibrate touch-screen" to access the calibration
screen (use to scroll through the menu).
3. Press the record dot (
16
) shown on the screen.

PROGAMMER MENU

The programmer menu can be used to confi gure the
buttons with standard functions, to confi gure the monitor
address and to set special functions.
Sat 12/06/13 01:21
INTERCOM
USER
1. Press PROGRAMMER
MENU.
2. Enter the password.
3. Press to confi rm the password and access the
INSTALLER MENU.

CONFIGURATION COMPLETE

Sat 12/06/13 01:21
INTERCOM ACTUATORS
CAMERAS
Functions that can be activated by the
installer
A. ACTUATOR DIRECTORY (disabled by default but can
be enabled by the installer) can be used to activate the
relay for a specifi c actuator installed in the system.
B. ALARM ACTIVATION (disabled by default but can be
activated by the installer) can be used to enable the
alarm system.
shortcut menu
Call divert (not confi gured by default but can be
programmed by the installer).
List of messages received by the switchboard
(not confi gured by default but can be programmed
by the installer).
Energy messages (not confi gured by default but
can be programmed by the installer).
CAMERAS
PROGRAMMER
to access the INSTALLER
ALARM
USER PROGRAMMER