Setting The Time/Date; Setting The Fan - Honeywell Wi-Fi VisionPRO 8000 Mode D'emploi

Setting the time/date

1 Touch the current time. The screen displays
Select Option.
2 Touch Time or Date, then touch Select.
3 Touch or until the proper time/date is
s t
displayed.
Done
4 Touch to save or
changes.
5 Touch Home to redisplay the Home screen.
NOTE: When registered to Total Connect
Comfort, the thermostat automatically sets
the time and adjusts for Daylight Saving
Time.

Setting the fan

FAN
1 Touch to display fan settings.
2 Touch On, Auto, Circ, or Follow Schedule.
3 Touch Done to save and exit.
On: Fan is always on.
Auto: Fan runs only when the heating or
cooling system is on.
Circ: Fan runs randomly about 35% of the
time (residential use only).
Follow Schedule: Fan controlled by
program (see pages 6 – 8 ).
33-00066EFS—05
Cancel
to ignore
Please Set Time
On
NOTE: In commercial use, touch
Auto or On to temporarily override
the programmed fan schedule.
5
MCR34092
Select Option
Time Date
MCR34155
6 :30 PM
MCR34094
MCR34096
Auto Circ
MCR34097