Setting System Mode; Preset Energy-Saving Schedules - Honeywell Wi-Fi VisionPRO 8000 Mode D'emploi

Setting system mode

1 Touch SYSTEM to display system settings.
2 Touch desired option:
Heat: Controls only the heating system.
Cool: Controls only the cooling system.
Off: Heating/cooling systems are off.
Auto: Selects heating or cooling
depending on the indoor temperature.
Em Heat (heat pumps with aux. heat):
Controls auxiliary/emergency heat.
Compressor is locked out.
3 Touch Done to save and exit.

Preset energy-saving schedules

This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses. To customize settings, see next page.
Period
Wake
Leave
Return
Sleep
Period
Occupied 1
Unoccupied 1
Occupied 2*
Unoccupied 2*
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.
33-00066EFS—05
Heat
Start time (Mon-Fri)
6:00 am 70°
8:00 am 62°
6:00 pm 70°
10:00 pm 62°
Start time
8:00 am
10:00 pm
12:00 am
12:00 am
Heat
NOTE: The Auto and Em
Heat system settings may not
appear, depending on how your
thermostat was installed.
Cool
(Mon-Fri)
78°
85°
78°
82°
Heat
70°
55°
70°
55°
6
MCR34098
Cool Auto
Off
MCR34099
Heat Cool
(Sat-Sun) (Sat-Sun)
70° 78°
62° 85°
70° 78°
62° 82°
Cool Fan
75°
85° Auto
75°
85° Auto
On
On