Reconnecting Your Wi-Fi Network; Unregistering Your Thermostat - Honeywell Wi-Fi VisionPRO 8000 Mode D'emploi

Reconnecting your Wi-Fi network

1 Touch MENU. Select
2 Find the name of the network you want to use
by pressing the arrow buttons to scroll up/down
or left/right. Press the Wi-Fi network name, then
press Select. The thermostat might display a
password page.
3 Enter the password. (See step 1.6 on page 2
for assistance with entering a password.) Press
Done when complete.
4 The thermostat displays "Connecting Please
Wait" then a "Connection Successful" screen.
5 Touch Done.
• If your thermostat is registered, you will
see your signal strength and other status
information. Touch Done.
• If the screen displays "Register at
Honeywell.com/TCC," go to Honeywell.com/
TCC and follow the instructions there, or see page 3.

Unregistering your thermostat

If you remove the thermostat from
your Total Connect Comfort website
account (for example, you're moving
and leaving the thermostat behind),
follow these steps:
1 On mytotalconnectcomfort.com log into
your account.
2 Under My Account, select Edit My
Profile.
3 Click the Delete My Account button.
Your thermostat will display an orange
button that says Register Online.
33-00066EFS—05
Wi-Fi Setup.
DoaIol Inrol Madorl
Installer Options
18
Wi-Fi Setup
Connection
Successful
M35352
M35360
M35351