Setting The Time/Date; Setting The Fan - Honeywell RTH9585 Serie Guide De L'utilisateur

Setting the time/date

1 Touch the current time. The screen displays
Set Time/Set Date.
Set Time
2 Touch
3 Touch p or q
displayed.
Done
4 Touch to save or
changes.
Note:
This thermostat will automatically update
for daylight saving time (if observed in your
area) and all date/time information is stored.
If the thermostat is connected to Wi-Fi and
registered to Total Connect Comfort, the current
time is updated from the internet.

Setting the fan

FAN
1 Touch to display fan settings.
2 Touch On, Automatic, Circulate, or Follow
Schedule.
Note: Follow Schedule option only appears if
the fan is set for On or Circulate for one or more
program periods.
Done
3 Touch to save and exit.
On: Fan is always on.
Automatic: Fan runs only when the heating or cooling system is
on.
Circulate: Fan runs randomly about 35% of the time (home use
only).
Follow Schedule: Follow Schedule is not an option if all programs
are set to fan auto (see pages 16 -18).
Note:
Touch On, Automatic, or Circulate to temporarily override the
programmed fan schedule.
Set Date.
or
until the proper time/date is
Cancel
to ignore
12:12 am
Done
15
FAN
69-2715EF—07
Done