EINHELL NEW GENERATION EVK 1600 Mode D'emploi page 18

Anleitung EVK 1600 SPK 1
GB
on warranty certificate).
Do not clean the scarifier with running water,
particularly with high-pressure water.
Ensure that all mounting components (i.e. bolts, nuts
etc.) are always tightened so that the scarifier can be
safely operated at all times.
Store your scarifier in a dry room. In order to ensure
that you enjoy your scarifier for many years to come,
all screwed parts, as well as the wheels and axles,
should be cleaned and lubricated.
Keeping your scarifier in good condition not only
ensures a long lifespan and
high-performance, but also enables the machine to
thoroughly scarify your lawn with minimal effort. For
best results, clean the scarifier with a brush or rag.
Do not use any solvents to remove dirt.
At the end of the season, perform a general
inspection of the scarifier and remove any residues
which may have accumulated.
At the start of each season, ensure that you check
the condition of the scarifier.
If repairs are necessary, please contact one of our
customer service centers (see address on warranty
certificate).
10. Replacing the spike drum
For safety reasons, we recommend having the spike
drum replaced by an authorized professional (see
address on warranty certificate).
Important! Wear work gloves!
Only replace the unit with a genuine Einhell spike
drum , as this will ensure top performance and safety
under all conditions.
18
20.10.2005 17:01 Uhr Seite 18
11. Ordering replacement parts
The following information should be given when
ordering replacement parts:
Model of machine
Art. No. of machine
ID No. of machine
Replacement part number of the required
replacement part
For our latest prices and information please go to
www.isc-gmbh.info
12. Technical data
Voltage:
Power consumption:
Working width:
Number of blades
Scarifying depth: Infinitely adjustable up to 10 mm
LPA sound pressure level:
LWA sound power level:
Vibration on the shaft
230 V ~ 50 Hz
1600 W
39 cm
6 pieces
85 dB(A)
98 dB(A)
≤ 2,5 m/s
2