Lenze m850 Instructions De Montage page 16

Plug connection
The connectors comply with vibration and shock class 3M6 as specified in IEC/EN60721-3-3.
This applies to all power, encoder and fan connector boxes.

Stop!
Cable connectors with screwed connection:
ƒ
– Always use with the O-rings supplied.
Cable connectors with a SpeedTec bayonet lock:
ƒ
– Remove O-ring and dispose of it.
When connecting the cable connector to the motor connector, make sure that the aids to
orientation (pos. 1) are facing each other. Only then trouble-free operation is ensured.
Lenze • MA 33.0003 • 6.0
Mechanical installation
Plug connection
16