ENGLISH
10
Technical Data
Joint cleaner
Art. No
AnschService connectionluss
Rated input
No-load speed
Brush diameter
Weight
Safety class
Type of protection
Noise details
Sound pressure level L
Measured sound power level L
Guaranteed sound power level L
Measured according to
Uncertainty K= 3 dB (A);
1)
Wear ear protectors!
Vibration details
Vibration emission value (triaxial vector sum) deter-
mined according to EN 60335
Vibration emission value a
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
should also take into account the times when the tool
is shut down or when it is running but not actually
in use. This may significantly reduce the vibrato-
ry load over the total working period.
Identify additional safety measures to protect the ope-
rator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
GFR 140
94312
230 V~50Hz
140 W
1200 min
100 mm
1,7 kg
IP 20
68 dB (A)
1)
pA
88 dB (A)
2)
WA
91 dB (A)
3)
WA
EN 60335;
2000/14/EG;
1)
2) 3)
1,6 m/s
h
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance properly.
Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
-1
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
II
In case of any doubts about connection and operation
refer please to our customer center
This appliance is not intended for use
by children.
The machine may not be used by
persons with reduced physical, sensory
or mental capabilities or persons with
a lack of knowledge or experience
unless they are supervised by a person
responsible.
Children must be supervised in order
not to play with the machine.
2
Specified Conditions Of Use
The joint cleaner is intended solely for removing moss
from between uncoated concrete paving stones
and concrete slabs. Coated stone surfaces could be
damaged.
Not observing general regulations in force and instruc-
tions from this manual does not make the manufacturer
liable for damages.
Residual risks
Even when the device is used properly and all safety
regulations are complied with, there still may be
some residual risks.
• noise emissions
• dust emissions
• vibrations to hand and arms
• Danger of burns
Tool and workpiece heat up during operation.
• Risk of injury
Sharp tools and workpiece edges
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)