Setting Up The Audio Options - Samsung DVD-V6700 Manuel D'utilisation

Using the Subtitle Language
1
Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
SETUP
Language Setup
Audio Setup
DVD
Display Setup
VCR
Parental Setup :
PROG
DivX(R) Registration
FUNC
OK
2
Press the OK or ‹¤button again.
Press the œ or ƒ¤button to select Subtitle,
then press the OK or ‹¤button.
Disc Menu : English
Audio : English
Subtitle : English
OK
3
Press the œ or ƒ button to select the
required language.
Automatic
‹ ‹ English
Français
Subtitle
Deutsch
Español
Italiano
Nederlands
Others
OK
• Select Automatic if you want the subtitle
language to be the same as the language
selected as the audio language.
• Select Others if the language you want is
not listed.
4
Press the OK button.
Note
• Some discs may not contain the language you
select as your initial language; in that case the disc
will use its original language setting.
DVD Setup
‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
RETURN MENU
Language Setup
‹ ‹
‹ ‹
‹ ‹
RETURN MENU
Subtitle Language
RETURN MENU

Setting Up the Audio Options

1
Press the MENU button in the stop mode.
Press the œ or ƒ button to select DVD, then
press the OK or ‹¤button.
SETUP
Language Setup
Audio Setup
DVD
Display Setup
VCR
Parental Setup :
PROG
DivX(R) Registration
FUNC
OK
2
Press the œ or ƒ¤button to select Audio
Setup, then press the OK or ‹¤button. The
Audio Setup menu is displayed.
Dolby Digital Out
MPEG-2 Digital Out
DTS
Dynamic Compression
PCM Down Sampling
OK
3
Press the œ or ƒ button to select the
required item.
4
Press the OK or ‹¤button to select the
required option.
Dolby Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when
using the Digital Audio Output.
Note
• Be sure to select the correct Digital Output or no
audio will be heard.
MPEG-2 Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
DVD Setup
‹ ‹
‹ ‹
‹ ‹
‹ ‹
‹ ‹
RETURN MENU
Audio Setup
‹ ‹
: PCM
‹ ‹
: PCM
‹ ‹
: Off
‹ ‹
: On
‹ ‹
: On
RETURN MENU
English - 33