S
ettings
S
ettings
Tuning Your Television for the DVD-
VCR
You must tune your television for the DVD-VCR
only if you are using the RF cable.
To view pictures from your DVD-VCR when a
Audio/Video cable is used, the television must
be set to the audio/video mode (AV).
1
Switch on the television.
2
Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-
VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television
to be reserved for use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the II button.
5
Start a scan on your television or set the tele-
vision to UHF channel 36.
6
Fine tune the television until the pictures and
sound are obtained clearly.
7
When the picture and sound are perfectly
clear, store this channel at the desired
programme position on the television.
That programme is now reserved for use with
your DVD-VCR.
14 - English
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording.
• Preset your DVD-VCR to record a programme
automatically.
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
1
Press the MENU button, then press the OK or
button.
SETUP
Language
Clock
DVD
Install
VCR
User Set
Auto Power Off
PROG
Screen Messages
FUNC
OK
2
Press the or button to select Clock,
then press the OK or button.
The Clock Set menu is displayed.
3
Press the ¦ or button to select the hour,
minutes, day, month, and year. The selected
option is highlighted. Press the or button
to set them. The day of the week is displayed
automatically. Press the OK button.
SETUP
Time
Date
DVD
12 : 00
01 / JAN
VCR
PROG
FUNC
RETURN
OK
• You can hold down the or ¤button to
scroll more quickly through the values.
• Press the MENU button to exit the menu.
Setup
: English
: Off
: On
RETURN
MENU
Clock Set
Year
/ 2007 MON
MENU