Using The Assemble Edit Function; Using The Timer Programming Feature - Samsung DVD-V6700 Manuel D'utilisation

Using the Assemble Edit Function

This function allows you to start a new recording
at a specific position on the cassette while main-
taining a very smooth scene change.
1
Insert the cassette to be edited in your
DVD-VCR.
2
Press the ‹ll button to start playback.
3
When you reach the position from which you
wish to start the new recording,
press the ‹ll button.
4
Press the F.ADV/STEP button as often as
necessary to advance frame by frame, until
the exact recording position is located.
5
While the DVD-VCR is in still mode, hold
down the REC (●) button for a while to acti-
vate the assemble edit function. The mode is
changed to pause.
6
Select the source from which you wish to
record by pressing:
• The PROG or
channels.
• The INPUT SEL. button for the LINE IN 1,
LINE IN 2 input source.
7
Press the ‹ll button to start recording.
If you want to finish the recording, press the
■ button.
button for television
Using The Timer Programming
Feature
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
• You must check that the cassette tape is
loaded.
1
Press the MENU button, then press the œ or
ƒ button to select PROG.
SETUP
If you want to set the
DVD
timer program, press
VCR
the OK key.
PROG
FUNK
RETURN
OK
2
Press the OK or ‹ button. The timer pro-
gramming menu is displayed.
3
Press the OK or ‹ button to select PR, then
press the œorƒ button to select the required
station.
• Press the INPUT SEL. button to select an
input source (LLINE IN 1, LINE IN 2) other
then the tuner.
4
Press the ‹ button to select Day, then press
the œ or ƒ button to select the required day.
PR Day Start
01 MO 01
:
:
:
:
:
:
OK
Timer Method
MENU
Stop Speed
:
:
:
:
:
:
RETURN MENU
English - 25