End Search
Use this feature when you want to search for a
blank position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that
position. If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
Press the SEARCH button. The VCR
Function menu is displayed. Press the or
button to select End Search.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK
2
Press the OK or button.
Intro Scan
1
Press the SEARCH button.
The VCR Function menu is displayed.
Press the or button to select Intro Scan.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK
RETURN
2
Press the OK or button.
3
Press the ¦¦ or button depending on
the direction where your desired programme is
located.
INTRO SCAN : ¦¦
30 - English
VCR Function
RETURN
MENU
VCR Function
MENU
4
When an Index mark is found the DVD-VCR
will playback the tape for 5 seconds, after
which it will continue searching for the next
Index mark
INTRO SCAN : ¦¦
5
If you want to watch the tape from a
particular Index, press the
Index Skip Search
This feature will enable you to fast
forward/rewind to a specific point on a tape: e.g.
If you have recorded 3 different programmes on
a tape and you have rewound the tape to the
beginning, by using this feature you can go
directly to the start of programme 2 simply by
pressing the SEARCH button.
1
Press the SEARCH button.
The VCR Function menu is displayed.
Press the or¤button to select Intro Scan.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK
2
Press the OK or button.
3
Press the ¦¦ or button twice more.
4
These Index searches can be made forwards
(press the button) or backwards (press
the ¦¦ button).
(¦¦ -20
0
●
●
●
This will take you directly to the start of the
desired programme is located.
INDEX SEARCH : ¦¦ -06
To cancel an Index search simply press the
ll or ■ button.
ll
button twice.
VCR Function
RETURN
MENU
+20 )
●