Würth BS 10-A Traduction Des Instructions De Service D'origine page 14

OBJ_BUCH-1881-002.book Page 14 Wednesday, April 17, 2013 1:30 PM
 Always wait until the machine has come to a
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the power
tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight, fire,
water, and moisture. Danger of explosion.
 In case of damage and improper use of the
battery, vapours may be emitted. Ventilate
the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
 Use the battery only in conjunction with your
Würth power tool. This measure alone protects the
battery against dangerous overload.
 Use only original Würth batteries with the volt-
age listed on the nameplate of your power
tool. When using other batteries, e. g. imitations, recon-
ditioned batteries or other brands, there is danger of injury
as well as property damage through exploding batteries.
 Use only original Würth accessories.
Product Description and Specifications
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramic and plastic.
For damage caused by usage other than intended, the user is
responsible.
Product Features
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Keyless chuck
2 Torque presetting ring
3 Gear selector
4 Battery unlocking button*
5 Battery pack*
6 Rotational direction switch
7 On/Off switch
8 Battery charge-control indicator
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Universal bit holder*
12 Screwdriver bit*
* The accessories illustrated or described are not
included as standard delivery.
Tool Specifications
Cordless Drill Driver
Art. No.
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
*Value dependent of the battery pack being used
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 71 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2
Drilling into metal: a <2,5 m/s
h
2
Screwdriving: a <2,5 m/s , K =1,5 m/s
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly main-
tained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
BS 10-A
5700 101 X
V= 10.8
-1
min 0 – 400
-1
min 0 – 1300
Nm 30/15*
mm 10
mm 19
mm 7
mm 1.0 – 10
kg 0.95
2
, K =1,5 m/s ,
2
.
14