Connections; Connecting To Such As Subwoofer Output Terminal Or Line Output (Pin Jack) Terminals Of The Amplifier; Plug In The Subwoofer To The Ac Outlet - Yamaha NS-SW100 Mode D'emploi

Note
• Unplug the subwoofer and other audio/video
components before making connections, and do not
plug them in until all connections are completed.
• Connecting methods and terminal names on your
component (such as an amplifier or receiver) may be
different from those used in this book. Please refer to
the owner's manual that came with your component.
• After connecting, make sure that cable is connected
firmly.
Connecting to such as subwoofer
output terminal or line output (pin
jack) terminals of the amplifier
Connect to the subwoofer output terminal of the amplifier
(or AV receiver) using a commercially available audio pin
cable.
If the amplifier (or AV receiver) has no subwoofer output
terminal, connect to the line output (such as PRE OUT)
terminal.
Amplifier (The rear panel of various
amplifiers may differ in appearance.)
3
En

CONNECTIONS

Plug in the subwoofer to the AC outlet

After all connections are completed, plug the subwoofer
and other audio/video components into AC outlets.
To AC outlet