emerio GR-111972 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
3.
Hang up the appliance by having the long screws through the round holes on the hooks and then fixed into
the gap.
4.
The distance between the bottom of the appliance and the floor is at least 50 cm. The distance between
the top of the appliance and the ceiling is at least 1 metre. The distance between the appliance and the
upholstery materials and curtains is at least 1 metre.
OPERATION
1. Plug the appliance into an appropriate electrical outlet.
2. Rotate the thermostat control knob clockwise to the maximum setting.
3. Press the heat switch to select the desired setting --- turn on switch "I", there's low heat output; turn on
both switch "I" and "II", there's high heat output. The indicator light turns on to indicate the appliance is
running.
4. When the desired room temperature has been reached, turn the thermostat control knob anti-clockwise
slowly until you hear a "click" sound and the indicator lights on switches go out. This is the set
temperature.
5. The appliance will automatically maintain the set temperature. It will switch on when the room
temperature is below the set temperature, and switch off if it is above the set temperature.
6. To switch off the appliance, turn off both switch "I" and "II".
SAFETY SYSTEM
The appliance has a safety system which automatically switches the unit off when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket and let it cool down for at
least 30 minutes. Put the plug in the socket and switch the heater on.
CLEANING THE HEATER
Always unplug the heater from the wall socket and allow it to cool down completely before cleaning. Clean the
outside of the heater by wiping with a damp cloth and with a dry cloth. Do not use any detergents or abrasives
and do not allow any water to penetrate the heater.
STORING THE HEATER
When the heater is not used for long time it should be protected from dust and stored in a clean dry place.
TECHNICAL DATA:
Operating voltage: 220-240V ~ 50/60Hz
Power consumption: 2000W
- 6 -

Publicité

Table des Matières
loading

Table des Matières