Pioneer Serato DDJ-1000SRT Mode D'emploi page 15

Importing music files (tracks)
! There are various ways to import tracks into Serato DJ Pro. For
details, see the Serato DJ Pro manual.
! If you're already using Serato Limited's DJ software (e.g., Scratch
Live, ITCH, Serato DJ Intro, or Serato DJ Lite) and you've already
created track libraries, you can use these libraries.
! If you're using Serato DJ Lite and you've already created track
libraries, you may need to reanalyze tracks.
The typical way to import music files (tracks) is as follows.
1 Click the [Files] key in the Serato DJ Pro screen to open
the [Files] panel.
The contents of your PC/Mac or the hard drive/device connected to the
PC/Mac are displayed in the [Files] panel.
2 Click the folder containing the tracks you want to add to
your library.
3 Drag and drop the selected folder to the crates panel.
A crate is created and the tracks are added to your library.
b
a [Files] panel
b Crates panel
Loading a track onto a deck
The following explains how to load a track onto deck [1] as an example.
1 Rotary selector
2 BACK button
1 Press the [BACK] button on this unit, move the cursor to
the crates panel, then turn the rotary selector to select the
crate etc.
2 Press the rotary selector, move the cursor to the library,
then turn the rotary selector to select the track you want to
load.
b
a Library
b Crates panel
3 Press the rotary selector.
The track loads onto deck 1.
a
Playing tracks
The following describes how to play the track on deck 1 (left) as an
example.
1 USB A, LINE, USB B switch
2 TRIM knob
3 EQ (HI, MID, LOW) knobs
4 COLOR knob
5 Headphones CUE button
6 Channel fader
7 HEADPHONES MIX knob
8 HEADPHONES LEVEL knob
9 CROSSFADER ASSIGN switch
a
15
En