Assembly; Assembling; Setting The Length Of The Suction Tube - Fakir Prestige SC 190 Mode D'emploi

Assembling

5
A
B
Setting the length of the
suction tube
B
Please ensure that the mains plug is disconnected before
assembling the parts otherwise the appliance might start up
unintentionally and cause injury.
● Insert the end of the suction hose into the suction pipe [5].
You will hear the two locking parts [6] on the left and right
click into place.
6
To release the suction hose, squeeze both locking parts
[6].
● Insert the handle [A] of the suction hose and twist slightly
to make sure it sits tightly in the telescopic suction tube
[B].
B
● Insert the telescopic suction tube [B] and twist slightly to
ensure it sits tightly in the floor suction nozzle [E].
E
● Use your thumb to press the slide element [7] in the di-
rection of the arrow.
● Hold the lower part of the pipe [G] in your other hand. Now
pull or push the suction tube to the required length.
● The vacuum cleaner is now ready for use.
7

Assembly

WARNING!
NOTICE!
GB
35