BoomToneDJ SlimPAR 7x10W 4in1 Eco Mode D'emploi page 14

A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SLA , Their DMX cables plugged into the DMX input jacks (daisy chain) and
the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr ,press ENTER, when the 1 is showing on the display.
Pressing ENTER . Use DOWN and UP button change the DMX512 address.
DMX Protocol :
4 channels Mode:
Channel
CH1
CH2
CH3
CH4
5 channels Mode:
Channel
CH1
CH2
CH3
CH4
CH5
6 Channels mode
Value
0-255 RED dimmer
0-255 GREEN dimmer
0-255 BLUE dimmer
0-255 WHITE dimmer
Value
0-255 RED dimmer
0-255 GREEN dimmer
0-255 BLUE dimmer
0-255 WHITE dimmer
0-255 Master dimmer
Function
Function
14