BoomToneDJ SlimPAR 7x10W 4in1 Eco Mode D'emploi page 12

2- Unit Description
 ①Microphone Receive music for the sound active.
 ② MENU
 ③ UP
 ④ DOWN
 ⑤ ENTER
 Note:
(1)In ten seconds, if no button was pressed, the LED display to turn off. Press any
button.
to turn on the LED display again.
(2)Whenever had any button be pressed, program will save all parameter after 2
seconds,
(3)No matter what the program in which mode,once to detect the DMX or SLAVE
signal,
the program will jump into DMX or SLAVE mode automatically. Then, if DMX or SLAVE
signal was disconnect, the program will return to the original mode.
This BoomToneDJ fixture is complying with European
standards: ROHS 2 .0 2011/65/EU ; EMC 2014/30/EU ; LVD
2014/35/EU
To go forward in the selected functions or go back the last layer menu
To go forward in the selected functions or increase parameters
To go backward in the selected functions or reduce parameters
Enter submenu
12