IMG STAGELINE CD-112/BT Mode D'emploi page 10

folder name and the lower line will show the
GB
folder number behind the symbol
The search function even allows you to find
a folder with a certain name during the replay of
a title:
1) Press the button FIND (27) twice so that the
magnifying glass symbol will flash on the dis-
Dir
play and (directory) will appear on the
right of it.
2) Search for the desired folder with the buttons
REV – SKIP – CUE (8). The upper line of the
display will show the folder name and the
lower line will show the folder number.
3) When you have found the folder, press the
button PLAY/ PAUSE (10) to start the first title
or keep the button REV or CUE pressed to
start another title from the folder until
appears next to the magnifying glass symbol.
Press the buttons REV – SKIP – CUE to
select the titles from the folder one after
another. To start the title selected, press the
button PLAY/ PAUSE.
6.4 Fast forward / reverse
For fast forward, keep the button CUE (8)
pressed; for fast reverse, keep the button REV
pressed. With MP3 files, fast forward / reverse
will only be possible within a title. You will not be
able to trace it acoustically, only by means of the
time indication on the display.
6.5 Repeat functions and
random replay
Press the button REPEAT (17) to activate one of
the repeat functions and the replay of the titles in
random order:
basic setting (PLAY ALL)
all titles of the sound carrier or of a pro-
grammed title sequence will be replayed
once, then the replay will stop
first actuation of button (PLAY ALL RANDOM)
the titles will be replayed once in random
order
next actuation of button (REPEAT TRACK)
the title selected will be repeated continu-
ously
next actuation of button (REPEAT FOLDER)
all titles in the folder selected will be repeated
continuously
(function available for MP3 files only)
next actuation of button (REPEAT ALL)
all titles will be repeated continuously
next actuation of button (RANDOM REPEAT)
all titles will be replayed continuously in ran-
dom order
next actuation of button (PLAY ALL)
return to basic setting
10
6.6 Muting the sound
.
To mute the sound of a title during replay, press
the button MUTE (26). To reactivate the sound,
press the button MUTE once again.
6.7 Anti-shock memory
The CD / MP3 player is equipped with an anti-
shock memory which is able to compensate inter-
ruptions (40 seconds max.) caused by shocks or
vibrations when replaying a CD. For testing,
press the button ESP (28) on the remote control
to deactivate the anti-shock memory (not in MP3
mode). The display (4) will briefly show
OFF
. To reactivate, press the button ESP once
again. The display will briefly show
File
6.8 Compiling an individual
title sequence
For replaying a selection of titles in a certain
order, a sequence of up to 64 titles can be pro-
grammed. For this purpose, in case MP3 files,
the arrangement of the folders should be known
to you ( chapter 6.3.4) as it will be necessary
to enter the corresponding number of each title
to be programmed.
1) Set the CD player to the stop mode; press the
button STOP (9), if required.
2) Activate the programming mode with the but-
ton PROG (18). Press all other buttons within
15 seconds otherwise you will exit the pro-
gramming mode. In this case, press the but-
ton PROG once again. The display will show:
— for a CD without MP3 files
PROGRAM
CD P-01
— for MP3 files
PROGRAM
P-01
3) For CDs without MP3 files, skip this step and
directly proceed with step 4.
For MP3 files, first select the number of the
folder containing the first title desired for the
title sequence. This is also necessary when
all the files are in the ROOT directory without
folder. In this case, enter 1 as the folder num-
ber.
Select the folder number with the buttons
REV – SKIP – CUE (8) or with the numerical
keys (3). To memorize, press the button
PROG. The four zeroes will flash as a prompt
to enter the title number.
4) Select the number of the first title of the title
sequence with the buttons REV – SKIP – CUE
(8) or enter it with the numerical keys (3). For
MP3 files in folders, please note that these
files are not arranged consecutively but that
the first file in each folder is always number 1.
5) To memorize press the button PROG. The
display will show the next memory location
number, e. g.
ESP
ESP ON
.
00
000 0000
P-02
.
6) Repeat steps (3), 4 and 5 for all further titles
desired until the entire title sequence has
been programmed.
7) To start the title sequence, press the button
PLAY/ PAUSE (10). The upper line of the dis-
MEM
play will show (memory) and the title
sequence will be replayed.
8) Press the buttons REV – SKIP – CUE to
select any title of the title sequence or keep
the corresponding button pressed to activate
the fast forward / reverse function within a title.
9) The replay will stop after the title sequence
has been replayed or when you press the
button STOP. To restart the title sequence,
first press the button PROG, then the button
PLAY/ PAUSE.
Note: A programmed title sequence will be deleted when
you change the sound carrier, when you press the but-
ton FUNC (19), when you press the button STOP in the
programming mode and when you switch off the player.
6.9 Operation of the Bluetooth receiver
The Bluetooth receiver is used for radio commu-
nication with a Bluetooth signal source (e. g.
notebook, smartphone, tablet PC). Thus, the
CD-112 / BT will be able to replay the audio files
that have been stored on this source.
Note: The Bluetooth signal source must be compatible
with the A2DP protocol (Advanced Audio Distribution Pro-
file); otherwise radio communication will not be possible.
1) Enable the Bluetooth function on the note-
book, smartphone or tablet PC (see manual
of the unit, if necessary).
2) To switch on the Bluetooth receiver of the
CD-112 / BT, keep the button BT POWER
(15) pressed briefly until the LED PAIR (12)
starts flashing.
3) To link the CD-112 / BT to the Bluetooth signal
source, keep the button PAIR (13) pressed
briefly until the LED PAIR keeps flashing
more slowly. As soon as the radio communi-
cation has been established, the LED PAIR
will light permanently.
Note: On the display of the Bluetooth signal source,
the CD-112 / BT is indicated as "Audio Bluetooth".
4) Start a title at the Bluetooth signal source.
5) To pause or continue the title, press the but-
ton (15).
Note: As long as the replay is interrupted, the signal
of the CD / MP3 player will be present at the output
PRIORITY (21).
6) Use the buttons DOWN /
to go to the previous or next title (press the
button briefly) or for fast forward / reverse
(keep the button pressed).
7) To switch off the Bluetooth receiver, keep the
button BT POWER pressed until the LED
PAIR is extinguished.
and UP/ (20)