Dell EMC PowerEdge R440 Manuel D'installation Et D'entretien page 8

Table 1. Features available on the front of the system
Item Ports, panels, and slots Icon
1 Left control panel
2 Optical drive (optional)
3 USB port (optional)
4 VGA port
5 Right control panel
6 Drive slots
Figure 2. Front view of 4 x 3.5-inch drive system
8 Présentation du système Dell EMC PowerEdge R440
N/A
N/A
N/A
N/A
Description
Contains the system health and system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.
NOTE: The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
• Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the Status LED indicators
• Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices. This feature
aggregates hardware or firmware inventory and various system
level diagnostic and error information that can be used in
troubleshooting the system. For more information, see the
Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
One optional slim SATA DVD-ROM drive or DVD+/-RW drive.
The USB port is USB 2.0 compliant.
Enables you to connect a display device to the system. For more
information, see the Technical specifications
Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.
Enable you to install drives that are supported on your system. For
more information about drives, see the
section.
section.
section.
Technical specifications