Pre-Operating System Management Applications; Options Permettant De Gérer Les Applications Pré-Système D'exploitation; System Setup; Viewing System Setup - Dell EMC PowerEdge R440 Manuel D'installation Et D'entretien

You can manage basic settings and features of a system without booting to the operating system by using the system firmware.
Sujets :
• Options permettant de gérer les applications pré-système d'exploitation
•

System Setup

• Dell Lifecycle Controller
• Boot Manager (Gestionnaire d'amorçage)
• Amorçage PXE
Options permettant de gérer les applications pré-
système d'exploitation
Votre système comporte les options suivantes pour gérer le système de pré-exploitation :
• System Setup (Configuration du système)
• Dell Lifecycle Controller
• Boot Manager (Gestionnaire d'amorçage)
• Preboot Execution Environment (Environnement d'exécution de préamorçage, PXE)
System Setup
By using the System Setup screen, you can configure the BIOS settings, iDRAC settings, and device settings of your système.
REMARQUE : Help text for the selected field is displayed in the graphical browser by default. To view the help text in
the text browser, press F1.
You can access system setup by one of the following:
• Standard graphical browser—The browser is enabled by default.
• Text browser—The browser is enabled by using Console Redirection.

Viewing System Setup

To view the System Setup screen, perform the following steps:
Étapes
1. Power on, or restart your système.
2. Press F2 immediately after you see the following message:
F2 = System Setup
REMARQUE : If your operating system begins to load before you press F2, wait for the system to finish booting, and
then restart your système and try again.

System Setup details

The System Setup Main Menu screen details are explained as follows:
36

Pre-operating system management applications

Pre-operating system management
applications
5