Dell EMC PowerEdge R440 Manuel D'installation Et D'entretien page 43

Option Description
Option
Capacité
Paramètres NVMe
Les paramètres NVMe vous permettre de définir le NVMe à l'un ou l'autre des lecteurs RAID mode ou non-RAID mode.
REMARQUE : Pour configurer ces disques en tant que lecteurs RAID, vous devez définir la NVMe lecteurs et l'option
SATA intégré dans le mode RAID au menu Paramètres SATA. Si ce n'est pas le cas, vous devez définir ce champ sur
Non-RAID mode.
Viewing NVMe Settings
To view the NVMe Settings screen, perform the following steps:
Étapes
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
REMARQUE : If your operating system begins to load before you press F2, wait for the system to finish booting, and
then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click NVMe Settings.
NVMe Settings details
About this task
The NVMe Settings screen details are explained as follows:
Option Description
NVMe Mode Enables you to set the NVMe mode. This option is set to Non RAID by default.
Boot Settings
You can use the Boot Settings screen to set the boot mode to either BIOS or UEFI. It also enables you to specify the boot order.
• UEFI: The Unified Extensible Firmware Interface (UEFI) is a new interface between operating systems and platform firmware. The
interface consists of data tables with platform related information, boot and runtime service calls that are available to the operating
system and its loader. The following benefits are available when the Boot Mode is set to UEFI:
• Support for drive partitions larger than 2 TB.
• Enhanced security (e.g., UEFI Secure Boot).
• Faster boot time.
REMARQUE : You must use only the UEFI boot mode in order to boot from NVMe drives.
• BIOS: The BIOS Boot Mode is the legacy boot mode. It is maintained for backward compatibility.
Description
Spécifie la capacité totale du disque dur. Ce champ n'est pas défini pour les périphériques
médias amovibles, tels que les lecteurs optiques.
Pre-operating system management applications 43