Recommendations For Use - Triangle GAMME STRATOS 260 Mode D'emploi

ENGLISH

RECOMMENDATIONS FOR USE

Connecting the speakers:
Use a cable of sufficient section and specially designed for connecting loudspeakers. The TRIANGLE High definition cable will give the best
results (contact your dealer).
TRIANGLE loudspeakers are equipped with terminals for bare wires. We recommend you carefully strip the end of each wire (on about 1 cm)
and insert it into the holes provided. Unscrew the keys at each terminal and tighten them carefully after inserting the wire. To prevent the risk of
short circuiting, it is important to ensure that no strand of wire is in contact with the opposite terminal pole. Use the same length of cable for the
left and right speakers. On connection, it is essential to the coherence of the end result, to respect the polarity in all unit speakers.
PRECAUTIONS:
If one of the speakers is placed next to a television, the colours on the screen may be affected by the speaker's magnetism. Keep a minimum
distance of 1 m. This precaution is not necessary for central speakers: they are shielded (limitation of the radiated magnetic field).
Example of stereo connection:
!
Example of home cinema connection
!
For other information on connecting your speakers, consult the owner's manual for your stereo amplifier or A/V.