Triangle GAMME STRATOS 260 Mode D'emploi page 17

ENGLISH
4th order acoustic crossover limits the sensitivity of the drivers to delay and the directivity of the
loud speaker in relation to the listener.
The natural frequency responses of the drivers are optimized by computer to be in perfect
harmony with the transfer function of the selected crossover.
In addition, speaker impedance is linearized to improve the amplifier/speaker interface.
Impedance modified in this way acts like a resistance and the amplifier works more easily.
The RPC enables phase distortion to be limited and loud speaker directivity to be reduced. The
horizontal or vertical position of the listener hardly affects the sound image.
INSTALLATION OF ACCESSORIES FOR NAÏA, LUNA, AUSTRALE and VOLANTE
!
Unpack the equipment. Place the loudspeakers with the black end uppermost (you should see five fixing holes, four for the base 2 and one for
the stainless steel spike1). Fix the base 4 and stainless steel spike 3. The base is fixed using four M6 screws (Use the key provided). Screw
the four screws completely for the base and the stainless steel spike.
!
Raise the adjusting keys 1 with the counternuts 2 on the base 5. Normally, parts 3 and 4 are already fixed on the base 5. The counternut 2
prevents movement of the adjusting keys. Turn the unit over and select a suitable place to install your system.