Triangle GAMME STRATOS 260 Mode D'emploi page 20

ENGLISH
!
Unpack the equipment. Place the legs with the side shown in the figure facing forward (you should be able to see five fixing holes, four for the
base 2 and one for the stainless steel spike 1). You can insert sand into hole 5 in order to weight the leg. The base 4 will block the hole. Fix the
base 4 and the stainless steel spike 3. The base is fixed using the four M6 screws (use the spanner and screws provided). Screw the four
screws completely for the base and the stainless steel spike. The hole 6 allows the amplifier / speaker connection cable to be passed along the
internal leg walls. The cable should exit the other end of the foot through the opening provided.
!
Raise the adjusting keys 1 with the counternuts 2 on the base 5. Normally, parts 3 and 4 are already fixed on the base 5. The counternut 2
prevents movement of the adjusting keys. Turn the unit over and select a suitable place to install your system.
!
Screw the 6 M4 screws to fix plate A to the stand B (use the screws and spanner provided)