ENGLISH
• install the appliance at least 2.3 m from the floor.
(fig. 6); If the access area is larger than the
appliance, we recommend installing two or more
units in parallel; in this case, leave a gap of 20-40
mm between one unit and the other.
6 6
• do not install the appliance in places where it could
come into contact with water, vapours, explosive
gases or corrosive substances (fig.7);
7 7
Mounting
Remove the mounting plate by loosening the screws
fixed to the back of the central body (fig.8).
8 8
Mounting plate
Fixing screw
A Mounting on concrete walls
Fix the bolts in the right position (establish this
position using the mounting plate and pour the
cement into the bolt holes) (fig.9).
9 9
Concrete
13-15
mm
When the cement has hardened, position the
mounting plate using the washer and nut as
indicated in the fig.10.
10
10
Washer
Elastic
washer
Nut
Fixing
plate
Apply the central body to the uppermost part of the
mounting plate and hook it on as indicated in the
fig.11.
70 mm
11