Publicité
Les langues disponibles
Les langues disponibles
EN
ENGLISH
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never clean
the machine and its components with solvents, flammable
or toxic liquids. Us only a damp cloth making.
After every work stint, clean the machine thoroughly
to remove all dust and debris, and repair or replace any
faulty parts.
Check the collection bag at regular intervals for any wear
and aging.
Clean the ejection opening and cover at regular intervals.
To avoid overheating and damage to the engine, always
keep the cooling air vents clean and free of sawdust and
debris.
FAILURE REMOVAL
Defect
Engine does not start or
starts, but does not run
further.
Engine starts, but does
not run at full power.
Engine splutters.
The motor does not de-
velop maximum power
Engine does not run
smoothly.
Excessive exhaust gases
(smoke).
Unsteady running,
strong vibrations
Poor mowing/catching
performance
Grass is not collected
36
Cause
Wrong starting process.
Empty fuel tank/Lack of fuel
Wrong fuel, storing without petrol tank
being drained
Wrong setting of the carburettor.
Sooted spark plug (carbon residues on elec-
trodes), electrodes distance too big.
The spark plug is wet from petrol (oversatu-
rated engine).
Dirty air filter
Dirty air filter
Wrong setting of the carburettor.
Dirty air filter
Wrong setting of the carburettor.
Blade is damaged
Blade is loose
Blade is blunt
Collection bag is blocked
Mowing height adjustment not regulated
Blocked channel
Full collection bag
Too wet grass
Keep all nuts, bolts and screws tight to be sure the equip-
ment is in safe working condition;
The starter rope must be replaced as soon as it shows
signs of wear.
The carburettor has an optimised setting 'ex works' . If any
further adjustments should be required contact your
competent customer service.
Use only original accessories and original spare parts.
Using other spare parts can result in accidents/injuries of
the user. The manufacturer will not be liable for any such
damage.
Please contact our service department if you need acces-
sories or spare parts.
Removal
Refer to the instructions in these operating
instructions.
Add some fuel
Drain the fuel tank and carburettor. Add
fresh petrol.
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean the spark plug, check the plug thermal
value, possibly change the plug.
Dry the spark plug out and refit it.
Clean or replace the air filter
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Clean or replace the air filter
Have the carburettor settings adjusted by
an authorised customer service organisa-
tion.
Replace the blade
Check and tighten the blade clamping
Have the blade sharpened or replaced
Empty the collection bag
Adjust the mowing height
Clean the ejection channel
Empty the collection bag
Cut in dry weather
Publicité
