Workplace; Important; Put Into Operation - Steba EK 7 Mode D'emploi

∙ Clean the housing with a damp cloth. Lid and egg tray are dish-
washer proof.

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable and a heat resisting surface. It is
important that no inflammable items are near to the device. Do
not place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.

Put into operation

∙ The given amounts of water refer to room-warm eggs of size „M"
∙ Fill the cooking plate with cold water according to the indication on the measuring
cup. Never fill up more water than the maximum capacity!
∙ Broach the eggs on their flat side with the needle on the bottom of the measuring
cup and place them with the flat side up in the egg tray. Put the lid onto the device.
∙ Note: the cooking result is affected by various factors, such as size, thickness of the
eggshell, temperature.
∙
∙ The basic setting can be adjusted with changed amounts of water:
o Harder eggs: fill in slightly more water than indicated on the scale.
Softer eggs: fill in slightly less water than indicated on the scale.
o
13