Preparing for Shooting
Preparing a Battery (Sold Separately)
Preparing a Battery (Sold Separately)
Choose from the below batteries:
• AA (R6) NiMH batteries (× 4)
AA (R6) manganese batteries cannot be used.
Loading Batteries
Loading Batteries
1
Open the battery
compartment cover.
2
Insert the batteries with
correct +/– polarity.
3
Close the battery
compartment cover.
Attaching to the Camera
Attaching to the Camera
Confi rm that both the camera and the macro fl ash are off. Attaching or removing
the macro fl ash while either the fl ash or the camera is on may result in
malfunction.
1
If the screws on the joints are
tightened, loosen them ( 1 ).
2
While holding down the buttons on
both sides of the joint ( 2 ), attach
the joint to the lens ring ( 3 ).
• Choose the lens ring whose size
matches the fi lter diameter of the lens
to be used.
18
EN
• AA (R6) alkaline batteries (× 4)
1
2
1
2
3