Taurus Geyser Diamond 2400 Mode D'emploi page 16

- The water fill-up opening must
not be left open while the iron is
being used.
- Never leave the appliance unat-
tended while in use.
- Never leave the appliance
connected and unattended if is
not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a
surface while in use.
- Do not use the appliance on any
part of the body of a person or
animal.
- Do not use the appliance to dry
textiles of any kind.
- CAUTION: Do not sleep while
using this appliance, as there is
risk you could be harmed.
- Turn the thermostat control to
the minimum (MIN) setting. This
does not mean that the iron is
switched off permanently.
Service:
- Make sure that the appliance
is serviced only by specialist
personnel, and that only original
spare parts or accessories are
used to replace existing parts/
accessories.
- Any misuse or failure to fo-
llow the instructions for use
renders the guarantee and the
manufacturer's liability null and
void.
Manual Geysers.indb 16
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been
removed.
- Some parts of the appliance have been lightly greased.
Consequently, the first time the appliance is used a light
smoke may be detected.
- Prepare the appliance according to the function you
wish to use.
Filling with water:
- It is essential to have filled the deposit with water to be
able to work with steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to observe the MAX level
(Fig. 1)
- Close the lid of the filling mouth.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired temperature
position.
- Do not use temperatures higher than those indicated on
the garments to be treated.
• Temperature for synthetic fibres (Polyester, Nylon...).
• • Temperature for silk, wool.
• • • Temperature for cotton. (Minimum temperature for
steam ironing)
Max Temperature for linen.
- If garment has various kinds of fibres, select the tempe-
rature for the fibre that requires the lowest temperature.
(For example, select the temperature for polyester for an
article made out of 60% polyester and 40% cotton).
- Wait until the pilot light (F) has gone out which will
indicate that the appliance has reached an adequate
temperature.
- During use the pilot light (F) will automatically flash
on and off, thus indicating that the heating elements are
operating in order to maintain the desired temperature.
Dry ironing:
- The appliance has a steam flow regulator that permits
dry ironing (without steam) when placed in the 0 posi-
tion.
Steam Ironing:
- It is possible to iron with steam whenever the deposit
is filled with water and the adequate temperature is
selected.
Steam flow control:
- The appliance has a (C) control knob that allows to get
the control of the steam flow.
Spray:
- The spray can be used in both steam and dry ironing.
- Press the spray button ( A ) to use this operation.
- The spray button has to be pressed repeatedly to release
the first spray.
26/06/12 16:17