Haussmann Xpert HSMS15A-10-DB Mode D'emploi page 36

ADDITIONAL SAFETY RULES FOR MITRE SAWS
.
Use only blades as recommended by the
manufacturer.
.
Do not use blades manufactured from high
speed steel.
Warning! Never use the mitre saw if not
mounted on a suitable stand or bench. The
mitre saw can become unstable in double
bevel position.
.
If the table insert is damaged or worn,have it
replaced by an authorized service centre.
.
Before making compound mitre cuts, ensure
that the work head is securely fixed in the
desired position.
.
Rags, cloths, cord, string and the like should
never be left around the work area.
.
Avoid cutting nails. Inspect the workpiece and
remove all nails and other foreign objects
before starting sawing.
.
Support the work properly.
.
Do not attempt to free a jammed blade before
first switching off the saw.
.
Do not slow or stop a blade with a piece of
wood. Let the blade come to rest naturally.
EN
.
If you are interrupted when operating the saw,
complete the process and switch off before
looking up.
.
Periodically check that all nuts,bolts and other
fixings are properly tightened.
.
Always hold the saw on parts that are
insulated.
.
If you accidentally cut into hidden wiring or
the saw's own cable, the metal parts of the saw
36
will become 'live' . Switch off at the mains and
remove the plug immediately.
.
Connect the saw to a dust collection device
and ensure that it is operated properly.
.
Wear gloves when handling saw blades.
.
Keep the floor area around the machine level,
well maintained and free of loose materials
such as wood chips and cut-offs.
.
During slide cutting, always ensure that the
saw blade is pushed away from the operator.
.
Always use stands to provide support for long
work pieces that over hang the turn table.
.
Feed workpiece into a blade or cutter against
the direction of rotation of the blade or cutter
only.