Rollotec - Berker RolloTec Mode D'emploi

GB
Connection of a
Example for 2 blind/shutter motors:
Insert
pushbutton
The automatic and manual control of both motors is ensured 'centrally' by insert
in conjunction with a
for both motors in parallel so that the connected motors will run up or down together
(e.g. after central UP command in the morning and central DOWN command in the
evening for all blind/shutter motors connected).
The motors M1 (insert
manually from the
Further 24V inserts can be added as shown in the schematic.
Important: As long as an UP signal is present on the extension input with terminal
'1'
device itself or by automatic control.
30
®

RolloTec

insert 'Komfort' for DC drives 'central control'.
with RolloTec ® clock timer; inserts and with RolloTec
or RolloTec ® pushbutton.
RolloTec ® clock timer. The switching commands are evaluated
) and M2 (insert ) can, in addition, also be operated
RolloTec ® radio-control pushbutton or from a RolloTec
and terminal '2' , the blind/shutter cannot be operated manually on the
® radio-control
® pushbutton.
GB
Connection of RolloTec ® insert 'Komfort' for DC drives
2 groups
Example for 6 blind/shutter motors
Central control is ensured by the 24 V insert in conjunction with a
timer. Two groups comprising three 24 V inserts respectively with a
control pushbutton or with a RolloTec ® pushbutton can be operated locally. The
inserts for motors M1 and M4 have a leading function for the respective group. If
these motors are activated, all the motors of the complete group will follow suit.
Further 24V inserts can be added as shown in the schematic.
Important:
As long as an UP signal is present on the extension input with terminal '1'
terminal '2' , the blind/shutter cannot be operated manually on the device itself or
by automatic control.
To avoid overloading, the power ratings of the supply units, motors (see manufacturer's
instructions) and inserts must be observed (see Technical characteristics).
for central control with
®
RolloTec clock
RolloTec ® radio-
and
31