Chauvin Arnoux C.A 406 Mode D'emploi page 33

30kV probe
- The HT 30000 probe allows measurements up to 30000V DC.
- Use the 3V DC range.
- Reading directly in kV, on the 30 scale.
WARNING : Before putting the probe in contact with the source to be
measured, connect the ground lead to the earth.
Temperature measurements from - 50°C to + 1000°C
The ST2 1000 temperature probe transforms
your C.A 406 into an all purpose thermometer
by means of its specialised sensors (type k).
- Measurement possible up to 1000°C
according to the sensor used.
- Output signal of the probe : 1mV DC / °C.
- Use the 50µA - 100mV DC and 1V DC
ranges.
- To take the measurement, press the
"TEMP" button on the probe.
100mV DC range
1V DC range
: 100 scale, direct reading in°C.
: 100 scale, reading x 10.
33