Chauvin Arnoux C.A 406 Mode D'emploi page 32

- The PAC or E series Hall effect clamps
have the same advantages but allow the
measurement of both DC and AC currents.
With the C.A 406 they are used on DC.
For example with the PAC 400 B clamp :
- ratio 1mV DC or AC / 1A DC or AC.
- measure up to 500A DC.
- used the 50µA - 100mV and 1V DC
ranges.
HT DC measurements with probes
5kV probe
- The HT 5000 probe allows measurements up to 5000V DC.
- Use the 50µA - 100mV DC range.
- Reading in V, reading coefficient x 50.
32