AYA ATI3/2 Manuel D'utilisation page 65

3. The power supply cable sections can withstand the load
specified on the rating plate.
To connect the hob to the mains power supply, do not
use adapters, reducers, or branching devices, as they can
cause overheating and fire.
The power supply cable must not touch any hot parts and
must be positioned so that its temperature will not exceed
75˚C at any point.
Check with an electrician whether the domestic wiring
system is suitable without alterations.
Any alterations must only be made by a qualified
electrician.
If the total number of heating unit of the appliance you
choose is not less than 4, the appliance can be
connected directly to the mains by single-phase electric
connection, as shown below.
Yellow / Green
5
Black
4
L1
Brown
3
L2
2
N1
Blue
N2 1
65