AYA ATI3/2 Manuel D'utilisation page 64

Under any circumstances, the brackets cannot touch
with the inner surfaces of the worktop after installation
(see picture).
9.6 Cautions
1. The induction hotplate must be installed by qualified
personnel or technicians. We have professionals at your
service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher,
fridge, freezer, washing machine or clothes dryer, as the
humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better
heat radiation can be ensured to enhance its reliability.
4. The wall and induced heating zone above the table
surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive
must be resistant to heat.
6. A steam cleaner is not to be used.
9.7 Connecting the hob to the mains power supply
This hob must be connected to the mains power supply
only by a suitably qualified persol
Before connecting the hob to the mains power supply,
check that:
1. The domestic wiring system is suitable for the power
drawn by the hob.
2. The voltage corresponds to the value given in the
rating plate
64