Graf ECO BLOC INSPECT FLEX Notice D'installation page 19

GRAF EcoBloc Inspect flex
Order-Nr. 402005
The points described in these
instructions must be observed
under all circumstances. All
warranty rights are invalidated in
the event of non-observance.
Separate installation instructions
are enclosed in the transportation
packaging for all additional articles
purchased from GRAF.
The Graf EcoBloc Inspect must be
checked for any damage prior to
installation under all circumstances.
Missing instructions can be
downloaded on www.graf.info or
can be requested from GRAF.
mail@graf.info
www.graf.info
Instructions for installation the
GRAF EcoBloc Inspect flex
Contents
1. GENERAL INFORMATION
1.1 General
1.2 Safety
1.3 Information about operating the system
2. GENERAL PRODUCT INFORMATION
3. TECHNICAL DATA
3.1 Technical data for the GRAF EcoBloc Inspect flex
3.2 Technical data for the GRAF EcoBloc Inspect flex
baseplate
4. TRANSPORT AND STORAGE
4.1 Transport and storage
5. LOCATION OPTIONS
5.1 Location
5.2 Pre-treatment
5.3 Installation dimensions
6. LOAD CLASSES
6.1 Installation for pedestrian loading
6.2 Green spaces above the EcoBloc Inspect system
6.3 Installation for vehicle loading
7. INSTALLATION
7.1 Construction & installation of an infiltration tank
7.2 Covering with geotextile
7.3 Positioning of EcoBloc Inspect ground plates
7.4 Positioning the EcoBloc Inspect flex
7.5 Fitting inlet
7.6 Connecting Inspection channel
7.7 Covering the EcoBloc Inspect system
8. CONSTRUCTION & INSTALLATION OF ATTENUATION
TANK
8.1 Installation of attenuation tank
8.2 Laying geomembrane and geotextile
8.3 Construction & installation of attenuation tank
9. INSTALLATION UNDER TRAFFIC AREAS UP TO HGV60 30
10. USE
INSTALLATION PHASE
11. OTHER APPLICATIONS
17 / 64
OF CONSTRUCTION MACHINERY IN THE
18
18
18
18
19
20
20
20
21
21
22
22
22
23
24
24
24
24
25
25
25
25
25
27
27
28
29
29
29
29
31
32