LIVARNO LUX 14107202L Instructions D'utilisation Et Consignes De Sécurité page 11

Allow the light to cool off completely.
Turn the reflector
1
Model 14107202L or 14107302L:
Note: Retighten the locating screw
reflector moves out of position. You will
1
need a fitting screwdriver to do this.
Turn the lamp shade
Note: Retighten the locking lever
lamp arm moves out of position.
2
Maintenance and Cleaning
DANGER OF ELECTRIC
SHOCK! First unplug the mains plug from the socket.
CAUTION! DANGER OF BURN INJURIES!
Allow the lamp to cool down completely.
DANGER OF ELECTRIC
SHOCK! For electrical safety, never clean the light
with water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
Disposal
The package and packaging materials
consist entirely of environmentally friendly
materials. They can be disposed of at your
local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to the
product and to all components bearing this symbol.
Do not dispose of products bearing this symbol in
your normal household waste, but instead they must
be taken for recycling to a collection site for electrical
and electronic appliances. Recycling helps to reduce
the consumption of raw materials and protects the
environment.
Start-up / Maintenance and Cleaning / Disposal / Information
to the desired angle.
if the
3 a
to the desired position.
2
, if the
3
Information
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase. The appliance has
been carefully produced under strict quality control.
Within the warranty period we shall rectify without
charge all material and manufacturing defects. In the
event of a defect arising during the warranty period,
please send the appliance to the listed Service Centre
address, making reference to the following article
number: 14107202L / 14107302L / 14107402L.
Wear parts (such as bulbs) and damage caused by
improper handling, non-observance of the operating
instructions or unauthorised interference are excluded
from the warranty. The performance of services under
the warranty does not extend or renew the warranty
period.
Manufacturer / Service
Briloner Leuchten GmbH
Im Kissen 2,
59929 Brilon,
Germany
Tel.: +49 (0) 29 61 / 97 12–800
Fax: +49 (0) 29 61 / 97 12–199
E-Mail: kundenservice@briloner.com
www.briloner.com
IAN 271736
Please have your receipt and the article number
(e.g. IAN 12345) ready as your proof of purchase
when enquiring about your product.
Declaration of conformity
This product fulfils the requirements of the applicable
European and national directives (Electromagnetic
Compatibility 2004 / 108 / EC, Low Voltage Directive
2006 / 95 / EC, Ecodesign Directive 2009 / 125/EC,
RoHS Directive 2011 / 65 / EU). Conformity has
been demonstrated. The relevant declarations and
documents are held by the manufacturer.
GB/IE 11