Wire Cover Vhm/Pc--Lg - Eneo VHM-EC/ST Série Instructions De Montage

Wire Cover VHM/PC-1-LG
for the 330mm VHM/EC&ST weatherproof housing in combination with the
WD-16/MK-W wall bracket (Art. No. 73177)
NOTE: The two screws provided for mounting
the housing onto the wall bracket
(in the VHM housing accessory pack, M6x25)
must be exchanged for the screws from
the wire cover accessory pack (M6x22).
. Mount the wall bracket and connect the wires.
. Mount the wire cover as follows:
(Art. No. 79696)
Guide pin
Groove stone
a) Loosen the Allen screw on the wall bracket
and slightly turn the housing away from the wall.
b) Place the wire cover onto the guide rail on the lower
side of the housing. In order to do this, slide the
guide pin into the guide rail (see figure).
9
Guide pin