Angle Adjustment, Height Adjustment - Sharp LL-172A Mode D'emploi

Angle adjustment, height adjustment

CAUTION!
- Be sure to hold both sides of the monitor when
adjusting the viewing angle. The LCD panel
used in this monitor is made of glass. Pressure
from hands on the LCD panel could cause
damage.
- Be careful not to allow your fingers to be
pinched.
Angle adjustment
[LL-172A]
approx. 5°
[LL-172G]
approx. 5°
approx. 45°
approx. 25°
approx. 25°
approx. 45°
Height adjustment [LL-172G]
1. Release the lock.
2. Adjust the height of the stand.
3. Set the lock.
approx. 70 mm
2
CAUTION!
- Be sure to release the lock before adjusting the
height of the stand. Extending/contracting the
stand when it's locked may result in damage to
the product.
- Ensure that the stand is properly locked except
while adjusting the height.
13
3 1