Technical Data - brennenstuhl CM L 4050 Mode D'emploi

048316 CO-Melder CM L 4050.qxp_048316 BA_CO-Melder CM L
CM L 4050

3. Technical data

The CO-detector is calibrated so that it sounds in
response to the following CO-values, in compliance
with EN 50291-1:2010 + A1:2012.
CO concentration No alarm
in the air
50 ppm
100 ppm
300 ppm
Protection class:
Power:
Max. current:
Sound level of signal: 85 dB (1 m distance)
Battery life:
Device service life:
ATTENTION:
IMPORTANT!
THIS IS NOT A SMOKE ALARM! This CO-detector
was developed to detect carbon monoxide coming
from ANY combustion source. It was NOT
developed to detect smoke, fire or other gases.
Operating Instructions
before
60 min.
10 min.
-
IP 20
4.5 V (3 x AA 1.5 V)
< 55 mA (alarm)
5 years
7 years
Alarm
before
90 min.
40 min.
3 min.
19