Operation And Mounting; Selection Of The Mounting Site - brennenstuhl CM L 4050 Mode D'emploi

048316 CO-Melder CM L 4050.qxp_048316 BA_CO-Melder CM L
CM L 4050

4. Operation and Mounting

In this chapter, the basic functions of the detector
are explained. Read through this chapter carefully
so that you understand and can use all functions.

4.1 Selection of the Mounting Site

WHERE SHOULD THE CO-DETECTOR BE
INSTALLED
G Minimum protection (every floor, every sleeping
area)
Optimum protection (all rooms except kitchen
G
and bathroom)
• A detector should be installed on every floor of
the house, preferably in every room.
• The CO-detector is also suitable for boats and
recreational vehicles.
Operating Instructions
bedroom
bed -
bedroom
room
kitchen/living- and
dining room
21