brennenstuhl CM L 4050 Mode D'emploi page 20

048316 CO-Melder CM L 4050.qxp_048316 BA_CO-Melder CM L
Operating Instructions
WARNING!
This detector is only intended for use in dry
rooms. Use outdoors or in moisture-prone rooms
is not permitted. In order to assure the protective
function of the detector, the LED POWER must be
checked at regular intervals (see the table Alarm
Signals and LED-Display). Cover the detector dur-
ing remodelling work but remember to remove the
covering after the remodelling is complete (exces-
sive paint fumes, solvents, cleaning solutions, etc.
can damage or impair the sensor). The CO-detec-
tor is no substitute for regular maintenance of
heating plants or having the chimney swept.
WARNING!
This device is intended to protect persons from
the acute effects of carbon monoxide. It cannot
offer persons with special medical characteristics
complete security. In case of doubt, you should
consult a physician.
WARNING!
If the CO detector is manipulated, there is a risk of
a malfunction and/or an electrical shock.
20
CM L 4050