Pelgrim GVW595 Notice D'utilisation page 97

User instructions
END OF CYCLE
At the end of the washing cycle the
dishwasher gives a short acustic signal and
the program indicators nr 4 and 5 start
blinking (the word "end" is displayed on the
window).
To switch off the dishwasher, open the door and press the ON/OFF
button (1).
ENERGY MANAGEMENT
After 5 minutes of waiting (washing cycle completed, stopped or set but
not started) the dishwasher switches to a standby state to reduce
energy consumption.
In this state, the dishwasher indicator panel (lights or display depending
on model) functions more slowly (switch-on once every 5 seconds).
REMOVING THE DISHES
At the end of the washing program, wait at least 20 minutes before
removing the dishes, to allow them to cool down. To prevent any water
droplets on the upper basket from falling on the dishes in the lower
basket, it is advisable to unload the lower basket first, and then the
upper basket.
9