HBM MP30DP Manuel D'emploi page 35

PME-MP30DP
Status1
Bits Name
0 MeasVOvfl
1 AOutOvfl
2 ScalErr
3 EEPROMErr
4 Limit1
5 Limit2
6 Limit3
7 Limit4
8 PAR1
9 PAR2
10..14 res
15 MViO
Tab 6.13: Contents of status 1
1)
Meaning of MViO:
NOR operation of: MesswOvfl, SkalErr, EEPROMErr.
MesswOvfl is the OR operation of ADCOvfl, HardwOvfl, GrossOvfl, NetOvfl
The parameter set number is coded in 2 bit binary:
Bit 8 Bit 9 Parameter set no.
0 0
1 0
0 1
1 1
Status 2
Double status word 2 returns detailed error flagging.
Bits Name
0 HardwOvfl
1 ADCOvfl
2 GrossOvfl
3 NetOvfl
4 AOutOvfl
5 MaxOvfl
6 MinOvfl
7 NegOvfl
8 Limit1
9 Limit2
10 Limit3
11 Limit4
12 SkalInError
13 SkalOutError
14 GainError
15 Init.Error
16 TransducerError
21 Stand Still
22..31
Tab 6.14: Contents of status 2
A0737-4.0 de/en/fr
Measured value in order
1
2
3
4
res
Meaning
Measured values overflow
analog output overflow
Scaling defective
EEPROM (parameter set) defective
Status of limit switch 1
Status of limit switch 2
Status of limit switch 3
Status of limit switch 4
Active parameter set bit 1
Active parameter set bit 2
reserved
Meaning
Hardware overflow
ADC overflow
Gross signal overflow
Net signal overflow
Analog output overflow
Maximum overflow
Minimum overflow
Overflow in negative direction
Status of limit switch 1
Status of limit switch 2
Status of limit switch 3
Status of limit switch 4
Scaling input invalid
Scaling output invalid
Nominal value exceeded
Works calibration defective
Transducer error
standstill recognition
reserved
1)
(if bit 0,2,3=0)
35
HBM