Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Preparation before playing disc
•
The option of display language catalog is preset to German. Please refer to Setup
operation.
•
Most of functions are operated by remote control. Either operation of remote con-
trol and front panel is effected when their buttons indicate the same function.
•
Turn the TV on and select AV as the TV input
•
Switch on the stereo system power if the player has been connected to stereo
system.
Place a Disc
•
This p layer will enter DVD working status after power on.
•
Connect AC power cord to AC outlet (AC230V, 50Hz)
•
Switch on the power, the displayed LOAD on the LED indicates the normal power
supply. (Note: The disc information appears after several seconds if there is a disc
after LOAD displayed otherwise appears NO DISC)
•
Press OPEN/CLOSE button to open disc tray. OPEN will be indicated on the right
upper of TV screen.
•
Place a disc (8cm or 12cm) ion to the tray. (For one-sided disc, position it with
printed title side facing up. For two-sided disc, position side to be playback facing
down)
•
Press OPEN/CLOSE again to close disc tray.
Play
Press PLAY to playback disc. You may operate according to MENU indication after
MENU shows on screen then press ENTER button to playback. Some discs can play
automatically after loaded.
Switch off the power via pushing the power button again, BYE will be displayed on VFD
before shut down.
STOP
Press STOP button to stop playing. When playback is stopped, the unit records the point
where STOP was pressed (RESUME function). Press PLAY again, and play will resume
from this point. Press STOP button twice, RESUME function will be cancelled
.
19
Publicité
