Publicité
Les langues disponibles
Les langues disponibles
CONNECTIONS
Connection to a TV set with SCART jack
The Scart or Euro AV cable serves as the universal connector for picture, sound and con-
trol signals.
Plug a cable onto the SCART socket at the back of the DVD player and the SCART IN
socket on the rear side of the TV set. Please also refer to your TV sets user manual.
Switch on the TV set and select the Scart input or the respective channel number. For
channel number and input selection please also refer to your TV operating instructions.
Notes :
The Scart interface of this DVD recorder is RGB enable. In RGB mode, the picture quality
is much better than in standard SCART mode. You can activate RGB mode on the video
settings page of your DVD recorder, You only can use this mode if it is supported by your
TV set. Otherwise, the use of RGB will result in wrong colour display. please also refer ti
your TV set's user manual.
s c a rt o u t
User can choose the proper video connection according to the TV set jacks and his re-
quirement (same as below). Choose below speaker size setting in the setting.
14
Publicité
