Specifications; Confirm Before Operation - Clarion DVH943 Mode D'emploi

3. SPECIFICATIONS

Digital/Analog Processing Section
Frequency response:
20 Hz - 44 kHz (Linear PCM 96 kHz)
S/N ratio:
95 dB or more
(IHF-A, sound-field effects OFF)
Separation:
80 dB or more (with digital input)
Total harmonic distortion:
0.01% or less (with digital input)
Analog output / impedance:
4 V / 330 Ω (6ch output)
DSP/EQ section
DSF:
6 patterns
P.EQ functions
Band:
3-band × 3 ch (centre, front, surround)
F (central frequency):
20 Hz - 20 kHz (1/3 octave step, 31 points)
Q curve:
1 - 20 (5 points)
Gain:
±12 dB
General
Power supply:
DC 14.4 V (10.8 - 15.6 V)
Ground:
Negative ground
Power consumption:
480 mA
Dimensions:
230 (W) × 25 (H) × 170 (D) mm
Weight:
900 g
Note:
• Specifications and design are subject to change
without notice for further improvement.
4
DVH943
List of accessories
8 9 0 ! @
×2 ×2 ×4 ×4 ×1
1 DVH943 ...................................................... 1
2 CeNET cable (5 m) ..................................... 1
3 Owner's manual .......................................... 1
4 Warranty ..................................................... 1
5 Optical Digital Cable (5 m) .......................... 1
6 Speed pulse extension Cable (5 m) ........... 1
7 RCA PIN Cable (5 m) ................................. 1
8 Mounting brackets ...................................... 2
9 Cord clamps ............................................... 2
0 Canoe clips ................................................. 4
! Mounting screws ......................................... 4
@ Cable Clip ................................................... 1

4. CONFIRM BEFORE OPERATION

This component does not operate independently as an stand-alone unit and must be used in
conjunction with an operational Clarion Source Unit (CeNET supported), or a 5.1 CH surround
decoder control unit (DVC923).
See section "8. SYSTEM EXPANSION" (P. 14) for details regarding other compatible components.
■ CeNET Cable
The CeNET cable used must not be over 20 m long (including the length of the CeNET branch cable
CCA-519). When making connections be sure that your cable length is not over 20 m.
■ Optical Digital Cables (sold separately or furnished)
Optical digital cables (sold separately or furnished) connected to this unit differ depending on the
model of CeNET component involved.
Consult your dealer regarding the kind of optical digital cable required for your component.
Likewise, consult the operating instructions accompanying your component for details regarding
7 connections.
CeNET connections
CeNET AV centre unit
(Gray)
CeNET DVD changer
(Black)
(Black)
(Gray)
CeNET CD changer
DCA-006 (5m)
(sold separately)
DCA-005 (5m)
(furnished)
DCA-008 (1.5m)
(sold separately)
5.1ch surround
decoder
5
DVH943