Charging Rechargeable Batteries - Schweizer eMag 43 HD Notice D'utilisation

Charging rechargeable batteries

1. Plug one end of the power adapter into the eMag 43 HD and the other end into a wall outlet (1).
2. The battery status LED flashes green (2) to show that the rechargeable batteries (NiMH) are charging.
For more information on the Battery status LED –> Refer to page 11.
3. As soon as the batteries are fully charged, the LED stops flashing and remains green. Unplug the eMag 43 HD
power adapter. The battery status LED turns off.
4. You can now use the eMag 43 HD continuously for approx. 2 hours. When the batteries are running low,
the battery status LED flashes red. Connect the power adapter and plug it in to recharge the rechargeable
batteriers or insert new batteries.
Note: If you wish to replace the supplied rechargeable batteries, replace all four at the same time with
1000 mAh NiMH rechargeable batteries with a MAXIMUM charging current above 250 mA.
1
2
EN
13 13 13